Soubriquet: Cocobolo NO CLIP!!!!! Clip hole. DISCOUNTED!

Soubriquet: Cocobolo NO CLIP!!!!! Clip hole. DISCOUNTED!

$200.00

Handmade in America, I designed and made all the parts. For more information on this particular model, see here and here.

I also did an explanatory video.

This is a fountain pen that is designed around the Zebra G dip nib, with provision for other nibs; You get to make your selection before you purchase.

To maximize this pen’s writing functionality, at will, you can swap in other “screw-in ****JoWo #6**** nib units” into this pen. Now, you can use a Zebra G, or many other nibs! You are almost unbounded. If you have questions, please contact me.

Notes :

  1. Due to my failure to correctly do math once, on these Cocobolo pens, I drilled the clip holes in the wrong place, so they won’t be able to take a clip. Otherwise, they have their own separate product listing, and they are excellent specimens.

  2. Cocobolo is all over the place in terms of appearance. Cream, Brown, Red, Orange, Black, Purple with streaks of white. In this particular batch, there is a lot of RED. You won’t get the pen shown in the photograph, but the collage was assembled to convey a fraction of the range of appearances for this material. NO Clips!!! Clip hole included!!

  3. Filling system is screw-actuated piston. (Kovacs.)

  4. The filling system reservoir is Cellulose Acetate and though more environmentally friendly than acrylic plastic, it is quite stainable, so be forewarned.

  5. Ensure the piston screw is all the way down (without over tightening!) before you try to screw the filling mechanism into the barrel. If it’s not, you won’t be able to put the barrel on. Don’t try to force the barrel on if it won’t screw in all the way.

  6. Once the filler is screwed in, snug it gently. Only tighten it enough to keep from coming loose when you take off the cap. Don’t HULK OUT.

  7. Don’t unscrew the knob without a nib collar in place, the piston will unscrew, and you’ll never it get it back in there without the right tool.

  8. No ink window. NO Clips!!! Clip hole included!!

  9. Because I’ve taken away the ink window, I gave the filling system triple start threads, so you can access it more rapidly than before.

Out for now.
Get notified by email when this product is in stock.
Add To Cart

Dimensions (Inches)

  • Cap length: 2 ⅝

  • Cap diameter: .6

  • Barrel length from section edge to tip: 4 ¼

  • Thread unit to section edge: 1

  • Minimum diameter of grip section: ⅜

  • Barrel overall diameter: 17/32

  • Capped length: 5 ¾